[cisco-voip] Caller-ID name

[Bill Riley III]

I am using H.323 for the gateway.

-----Original Message-----
From: pwalenta at wi.rr.com [mailto:pwalenta at wi.rr.com] 
Sent: Monday, January 23, 2006 2:06 PM
To: Bill Riley III
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Caller-ID name

Incoming caller-id name should work be default on the CallManager,
assuming you're using MGCP as your gateway protocol.

THe phone companies by default don't send it across PRI lines.  You can
have them turn it on.  I believe you must be using an NI type PRI for
this to work.