[cisco-voip] Valid places to configure MOH

[Timothy Medley]

The line takes precedence over the Device Pool.

Depending on the version of BAT you have installed,
you can Bulk change a group of phones or all phones
and set the MoH per line and/or Phone back to the
default.

Tim

--- Tim Reimers <tim.reimers at asheville.k12.nc.us>
wrote:

> AH HA!!!
> Dev pool...
> 
> _that's_ what I was forgetting.... thanks!
> I'd been looking...
> 
> Now if that'll just override the per-phone
> settings.... 
> 
> -----Original Message-----
> From: Timothy Medley [mailto:medley at mac.com] 
> Sent: Wednesday, January 25, 2006 9:40 AM
> To: Tim Reimers
> Subject: Re: [cisco-voip] Valid places to configure
> MOH
> 
> You can set Music on Hold at the Device Pool, Phone
> and Line. There is
> also a Service Parameter where  you can set the
> default MoH choice. The
> Line takes precedence over the phone which takes
> precedence over the
> Device Pool.
> 
> In my experience, I ty to set MoH at the Device Pool
> level, it tends to
> be slightly easier to manage.
> 
> Tim
> 
> --- Tim Reimers <tim.reimers at asheville.k12.nc.us>
> wrote:
> 
> > hi guys-
> > 
> > What are the valid places to configure MOH?
> > (in 4.01)
> > 
> > I know it's done on phones and lines on phones--
> > 
> > Is it possible to do this on CSS or Partition, or
> some other more 
> > 'global' setting?
> > 
> > If not, all my phones/lines are set to using "2-
> All in the Mind"
> > 
> > I'd like to globally switch that to "51- Fixed
> Audio"
> > 
> > I saw smoeone discussing SQL queries to find route
> patterns and change
> 
> > them...
> > 
> > is there a way to use SQL to find and modify all
> the MOH settings on a
> 
> > group of phones at one time?
> > > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> > 
> 
> 
>