[cisco-voip] Valid places to configure MOH

[Voll, Scott]

Tim-

 

I'm not sure about 4.0 but with 4.1 you can use the bat tool to remove
MoH on both the line and phone.  Then you setup the Device pool to be
the global parameter.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tim Reimers
Sent: Wednesday, January 25, 2006 6:23 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Valid places to configure MOH

 

hi guys- 

What are the valid places to configure MOH? 
(in 4.01) 

I know it's done on phones and lines on phones-- 

Is it possible to do this on CSS or Partition, or some other more
'global' setting? 

If not, all my phones/lines are set to using "2- All in the Mind" 

I'd like to globally switch that to "51- Fixed Audio" 

I saw smoeone discussing SQL queries to find route patterns and change
them... 

is there a way to use SQL to find and modify all the MOH settings on a
group of phones at one time? 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060125/72756395/attachment-0001.html