[cisco-voip] 7920 shared Line

[Timothy Frazee]

if your running 4.1.x you could setup a line group for the extension.
something like this:

hunt pilot = 1000
hunt list = it_bob_smith
line group=it_bob_smith (distribution algorithm=broadcast)
member=1001 (dn on bob's 7940)
member=1002 (dn on bob's 7920)

set the hunt pilot goto bob smith's voice mail when it expires.

it's a bit of work i know, but this should work perfect for you.

if your running 3.x or 4.0.x, then im sorry.




Bill Riley III wrote:

> I have a two 7920 wireless phones for technical support personnel so 
> they may walk around the building and still be reached by an internal 
> extension. We have this DN shared with their desk phone, a 7940, so 
> they may always be reached at the same extension. I need to be able to 
> receive a call on my desk 7940 and then be able to move it to the 7920 
> phone so I can walk around to the server room and other parts of the 
> building. The customer is saying that when they are on the 7920 phone 
> they see a barge soft key but it does not do anything. Is it possible 
> to take the call from the desk phone and “move” it on to the wireless 
> phone and vice versa? I would rather not setup a park slot but will if 
> that is the only solution. Any advice would be appreciated.
>
> Thanks,
>
> Bill Riley
>
> Network Engineer
>
> briley at jackhenry.com
>
>------------------------------------------------------------------------
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>  
>