[cisco-voip] Attendant Console - Line Status

[Andrew Dignan]

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ec5a5.html

DialRules.xml

This will get the job done.

> Pretty sure I know the answer to this one but thought I would check.  I
> have a site where the DN's assigned to the phone are four digit, however,
> they have a two digit site code that is needed to dial between sites.
>
> So...the directory number assigned to each users is six digits for
> corporate directory reasons.
>
> Therefore, the phone DN is 8000 for example, but Attendant Console is
> looking for 808000 and obviously can't find that directory number hence to
> line status.
>
> Is there any workaround for this?  I looked through the config files
> looking for a spot to tell it to not look at the first two digits, etc but
> no luck.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>