[cisco-voip] Fax Machines

[Ed Leatherman]

There is a network-clock-participate statement in the config (assuming its
default, I didnt put it there) but no select statement. i'll take a look,
thanks for the tip!

On 7/5/06, Anthony Kouloglou <akoul at dataways.gr> wrote:
>
>  Hi Ed,
> i had this problem and opened a TAC and solved it!!
>
>  Total Data (last 14 15 minute intervals):
> >       1 Line Code Violations, 4 Path Code Violations,
> >       *425 Slip Secs,* 0 Fr Loss Secs, 1 Line Err Secs, 0 Degraded Mins,
> >      *427 Errored Secs*, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail
>
> Secs
>
>  >>> You need to add the following in the router config -
> >> network-clock-participate wic 0
> > network-clock-select 1 e1 0/0
> >> Reload router after applying changes !!!!
> >> This forces the WIC and AIM to participate in the system clocking domain
>
>
>
-- 
Ed Leatherman
IP Telephony Coordinator
West Virginia University
Telecommunications and Network Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060705/8ec1277e/attachment.html