[cisco-voip] 1760 not recognizing VICs

[Schmelkin, Richard]

I agree with Ted.

Upgrade the IOS and Install a PVDM into that router.

The link I sent to that doc had PVDM info in it.

Probably a PVDM-256K-8 would do it just fine for what you have.

You may want to install a larger one if your planning on doing other
things with that 1760.

Rich

-----Original Message-----
From: Ted Nugent [mailto:tednugent69 at yahoo.com] 
Sent: Thursday, July 06, 2006 10:03 PM
To: Curt Shaffer; Schmelkin, Richard
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 1760 not recognizing VICs

Well you're running 12.2 mainline and this VIC is not
supported in any of the 12.2 mainline releases (at
least according the the attached doc). If it were me
I'd probably upgrade to 12.3 or at least
(c1700-sv3y-mz.122-15.T17.bin) you have enough
flash/DRAM to support this image. However, I can
assure you that you that the VIC will not be
recognized unless you install a PVDM. 

http://www.cisco.com/en/US/products/hw/routers/ps221/products_tech_note0
9186a00800c3399.shtml


--- Curt Shaffer <cshaffer at gmail.com> wrote:

> Router#show hardware
> 
> Cisco Internetwork Operating System Software
> 
> IOS (tm) C1700 Software (C1700-SV3Y-M), Version
> 12.2(37), RELEASE SOFTWARE
> (fc1)
> 
>  
> 
> Copyright (c) 1986-2006 by cisco Systems, Inc.
> 
> Compiled Thu 15-Jun-06 17:27 by pwade
> 
> Image text-base: 0x800080E0, data-base: 0x80B2D4A4
> 
>  
> 
> ROM: System Bootstrap, Version 12.2(4r)XL, RELEASE
> SOFTWARE (fc1)
> 
>  
> 
> Router uptime is 0 minutes
> 
> System returned to ROM by power-on
> 
> System image file is
> "flash:c1700-sv3y-mz.122-37.bin"
> 
>  
> 
> cisco IPM (MPC860) processor (revision 0x200) with
> 58983K/6553K bytes of
> memory.
> 
>  
> 
> Processor board ID FOC064906A1 (1450041897), with
> hardware revision BB67
> 
> M860 processor: part number 5, mask 2
> 
> Bridging software.
> 
> X.25 software, Version 3.0.0.
> 
> 32K bytes of non-volatile configuration memory.
> 
> 16384K bytes of processor board System flash
> (Read/Write)
> 
>  
> 
> Configuration register is 0x2101
> 
>  
> 
> Router#
> 
>  
> 
>  
> 
> Router#show version
> 
> Cisco Internetwork Operating System Software
> 
> IOS (tm) C1700 Software (C1700-SV3Y-M), Version
> 12.2(37), RELEASE SOFTWARE
> (fc1)
> 
>  
> 
> Copyright (c) 1986-2006 by cisco Systems, Inc.
> 
> Compiled Thu 15-Jun-06 17:27 by pwade
> 
> Image text-base: 0x800080E0, data-base: 0x80B2D4A4
> 
>  
> 
> ROM: System Bootstrap, Version 12.2(4r)XL, RELEASE
> SOFTWARE (fc1)
> 
>  
> 
> Router uptime is 1 minute
> 
> System returned to ROM by power-on
> 
> System image file is
> "flash:c1700-sv3y-mz.122-37.bin"
> 
>  
> 
> cisco IPM (MPC860) processor (revision 0x200) with
> 58983K/6553K bytes of
> memory.
> 
>  
> 
> Processor board ID FOC064906A1 (1450041897), with
> hardware revision BB67
> 
> M860 processor: part number 5, mask 2
> 
> Bridging software.
> 
> X.25 software, Version 3.0.0.
> 
> 32K bytes of non-volatile configuration memory.
> 
> 16384K bytes of processor board System flash
> (Read/Write)
> 
>  
> 
> Configuration register is 0x2101
> 
>  
> 
> Router#
> 
>  
> 
> They have VIC2FXS and VIC2FXO? The IOS I am running
> on this is the same one
> I am running on the 1750 and they work in there so I
> think I am safe with
> that. 
> 
>  
> 
> Thanks for the help.
> 
>  
> 
> Curt
> 
>   _____  
> 
> From: Schmelkin, Richard
> [mailto:Richard_Schmelkin at adp.com] 
> Sent: Thursday, July 06, 2006 8:45 PM
> To: Curt Shaffer; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] 1760 not recognizing VICs
> 
>  
> 
> Curt,
> 
>  
> 
> This issue can most certainly be a dsp issue.  But
> maybe other causes.
> 
>  
> 
> These cards need dsp's in order to function.
> 
>  
> 
> So you'll need to get some dsp's onto that router
> motherboard. 
> 
>  
> 
> What version IOS? Are these Vic2 or just Vic?
> 
>  
> 
> Older Vic cards, pre Vic2 may not be recognized by
> the IOS.
> 
>  
> 
> For example, there is a Vic-2FXS and a Vic2-2FXS.
> 
>  
> 
> Can you be more specific as to the version of IOS
> and they type of cards you
> are using as outlined above.
> 
>  
> 
> I just ran into this issue the other night at a
> client I was doing some work
> for. 
> 
>  
> 
> Check this link:
> 
>  
> 
>
http://www.cisco.com/en/US/partner/products/hw/routers/ps259/products_te
ch_n
> ote09186a00800e73f6.shtml#platform
> 
>  
> 
=== message truncated ===>
_______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.