[cisco-voip] %IPM_C54X-3-NODSP: Can't get dsp resources

[Curt Shaffer]

I just want a lab to start learning Cisco VoIP here!!! arg.I guess I am
learning through all of this trouble though eh?

 

 

I'm still getting amber lights on my VICs (I have tried all four ports).
This is the error that comes up:

 

%IPM_C54X-3-NODSP: Can't get dsp resources

 

Per this link
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
t/sem120t.htm

 

It says:

 

Explanation   There are not enough domain specific parts (DSPs) for all the
VICs in the router.

 

So I guess that means I need to get some PVDMs. The question I have now is;
I want to be able to use 1 dual FXS and 1 dual FXO modules that I have. I
would like for all of the ports to have the ability to be active at the same
time potentially. So am I right in guessing that PVDM-256K-4 (1 DSP) should
meet my requirements?

 

Thanks

 

Curt

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060708/1c7f128b/attachment.html