[cisco-voip] problems with installing McAfee on Unity and Exchange boxes

[Erick Bergquist]

Did you disable and stop CSA if CSA is installed/running?
How abouy any other third party programs? 

I have seen Mcaffee 8.0i have issues with CSA (where the mcshield service would crash) and from the 2 or 3 run ins I had with that issue, the mcafee 8.0i patch 11 seemed to fix the CSA/mcshield conflict but YMMV. 

----- Original Message ----
From: Lelio Fulgenzi <lelio at uoguelph.ca>
To: cisco-voip at puck.nether.net
Sent: Sunday, July 9, 2006 5:35:17 PM
Subject: [cisco-voip] problems with installing McAfee on Unity and Exchange boxes

       I had a problem installing McAfee on our Unity and  Exchange boxes this weekend and one install did not complete. Basically the  install stalled near the end and after at least 10 or 15 minutes it finally  completed, but as mentioned above, one stayed stalled. 
  
 Anyone see anything like this? I logged in as the  local administrator (same problem logging in as domain admin) but if I tried to  cancel the install and reboot it looked like it was installed, but I wanted a  clean install. 
  
 It's Enterprise 8.0i that I was trying to  install.
  
 Lelio
  
 P.S. I had installed the standalone CSA agent  first, but that posed no problems on our CallManager servers at  all.
  
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip




-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060709/937105b9/attachment.html