[cisco-voip] QSIG: Display name decoding fails
Ted Nugent
tednugent69 at yahoo.com
Tue Jul 11 12:49:03 EDT 2006
Do you have "Send Calling Name In Facility IE" checked
on the MGCP gateway?
--- Dietmar <db7td at gmx.de> wrote:
> Hi all,
>
> I have an ISO-QSIG connection between a MGCP
> controlled 2821 (backhauled to
> CCM 4.1(3)) and a Tenovis PBX.
>
> When someone places a call from the Tenovis towards
> the 2821, Callmanager
> seems to be unable to decode the display name (CNAM)
> of the calling party.
> However, the trace below shows that it is included
> within the facility.
>
> Can anyone tell me what is going wrong there?
>
> Thanks, Dietmar
>
>
>
> 000727: Jun 28 14:41:03.983: ISDN Se0/0/0:15 Q931:
> RX <- SETUP pd = 8 callref
> = 0x004F
> Bearer Capability i = 0x8090A3
> Standard = CCITT
> Transfer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0xA18381
> Preferred, Channel 1
> Facility i =
> 0x9FAA068001008201008B0100A10D0201480201290305008E
>
> 000000A16C02014A0201553064820900400800000000000086
>
> 0101A854304006092B0C02876D0B0E884CE033E013C0013EE1
>
> 0EA10C0A0102120737333931353032E10CC107008000000000
>
> 00C30102E20CC10700D40000000000C30101E300301006092B
>
> 0C02876D0B0E884D0303008000A10F02014C02010080075465
> 6E6F766973
> Facility i =
> 0x9FAA068001008201008B0102A10802014B0201540500A113
>
> 02014902013B300B30090A01050A01030A0104
> Calling Party Number i = 0x0080, '3700'
> Plan:Unknown, Type:Unknown
> Called Party Number i = 0x80, '8999'
> Plan:Unknown, Type:Unknown
> Shift to Codeset 4
> Codeset 4 IE 0x31 i = 0x80
> High Layer Compat i = 0x9181
>
> --
> E-Mail: db7td at gmx.de
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
More information about the cisco-voip
mailing list