[cisco-voip] having echo on voice calls

Jim McBurnett jim at tgasolutions.com
Wed Jul 12 15:11:45 EDT 2006


Show voice dsp  is the command of interest unless you are using a
2600/3600/3700
But how do you upgrade that?
J

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Wednesday, July 12, 2006 2:20 PM
To: 'Jason Aarons (US)'
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] having echo on voice calls



Will the below clip tell me if something set wrong as for as echo.  No
matter what I try they are still getting the echo.  And its on the ip
phone side.  Im made several changes to the network.  Nothing works.  It
not really bad and not durning the whole conversations(calls) by it
comes and goes

 

show call active voice brief

 

242F : 9358 163229920ms.1 +0 pid:0 Originate  connecting

 dur 00:01:05 tx:3268/522880 rx:3185/509600

 IP 10.5.5.45:29116 SRTP: off rtt:0ms pl:58400/1200ms lost:59/3/1
delay:70/65/75ms g711ulaw

 media inactive detected:n media contrl rcvd:n/a timestamp:n/a

242F : 9357 163229920ms.2 +0 pid:999020 Originate  active

 dur 00:01:05 tx:3185/535080 rx:3271/523360

 Tele 0/0/0:23 (9357) [0/0/0.21] tx:65370/65370/0ms g711ulaw noise:-63
acom:45  i/0:-23/-55 dBm

 

________________________________

From: Jason Aarons (US) [mailto:jason.aarons at us.didata.com] 
Sent: Friday, July 07, 2006 3:16 PM
To: James Grace
Subject: RE: [cisco-voip] having echo on voice calls

 

Send a show dsp, what dspware version do you have, there are bugs in
8.2.0, tac recommended I look at 8.4.0  -jason

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Friday, July 07, 2006 2:38 PM
To: cisco-voip at puck.nether.net; nmarus at gmail.com
Subject: [cisco-voip] having echo on voice calls

 

I just changed my echo parameters to 

Input -3

Output au  3

Echo can covera  64  

And my echo seem to be worse,  My question is was is the default if I
want to change it back.  And is there any thing else I can try or look
for 

James D. Grace 

CCNP CCNA MCSE MCDBA

Sr. System Engineer / Professional Svc.

Digitel Corporation

 

________________________________



Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060712/109db0ff/attachment-0001.html 


More information about the cisco-voip mailing list