[cisco-voip] BAT validity checks

[Wes Sisk]

Was your BAT job an update lines or what?  This sounds bad.  Let me  
know what your BAT jobs were and I will try to track it down.

/Wes
On Jul 12, 2006, at 11:11 PM, Lelio Fulgenzi wrote:

I was doing some work the other day with BAT using a logical  
statement to move some DNs from one partition to another. However, I  
forgot that I had some route patterns with the same DNs in the same  
partition. Needless to say, there were some crazy results. I was able  
to recover by deleting both the DN and the route pattern and starting  
from scratch.

Why would the BAT tool not do the same validity check the CCM admin  
tool does?

------------------------------------------------------------------------ 
--------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I can eat fifty eggs." "Nobody can eat fifty eggs."
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060712/d4d1a98a/attachment.html