[cisco-voip] Digit stripping on a Route-Group...

[Ted Nugent]

I guess I did misunderstand part of the question
judging from the other responses... Can you just
clarify... you're looking to run both MGCP and H323 on
the same gateways? Both Protocols on the same gateway
on a seperate trunks? Or are you just looking at using
an MGCP gateway as primary and a second H323 as a
backup?


--- Jonathan Charles <jonvoip at gmail.com> wrote:

> So, I want to use MGCP as my primary gateway
> protocol and H.323 as a
> backup (no SRST, no remote sites).
> 
> The plan is to add the gateways to CCM as H.323 AND
> MGCP and have two
> route-groups, one for MGCP and one for H.323 and
> then combine them
> into a route-list with MGCP first.
> 
> The problem is that I want to strip the 9 for MGCP
> (on the route-group
> or device) and not do so for H.323.
> 
> First off, as a design is this retarded? Second,
> should I strip the 9
> on the gateway or change the H.323 dial-peers to not
> include the 9 and
> strip it on the route list?
> 
> 
> 
> 
> Jonathan
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com