[cisco-voip] Problem of "No dsps found" !!

[Philip Walenta]

Check and see if your codec complexity is set to "flex" or "medium".  If you
have a small DSP, setting it to medium can cause this sort of issue.


  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Alan Su
Sent: Wednesday, July 19, 2006 11:21 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Problem of "No dsps found" !!


Dear All,
 
I have a voice gateway (2811) with a 8-port FXS module connected to PBX.
When I sh voice port sum, everything looks fine as bleow:
 
PORT      CH   SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
========= == ============ ===== ==== ======== ======== ==
0/2/0     --  fxs-ls      up    up   off-hook idle     y 
0/2/1     --  fxs-ls      up    up   off-hook idle     y 
0/2/2     --  fxs-ls      up    up   off-hook idle     y 
0/2/3     --  fxs-ls      up    up   off-hook idle     y 
0/3/0     --  fxs-ls      up    up   off-hook idle     y 
0/3/1     --  fxs-ls      up    up   off-hook idle     y 
0/3/2     --  fxs-ls      up    up   off-hook idle     y 
0/3/3     --  fxs-ls      up    up   off-hook idle     y 
 
But when I tried to make calls, only first 6 calls worked. The 7th and 8th
calls didn't work and came out the message:
 
*Jul 19 10:27:47 UTC: No dsps found either locally or globally!
*Jul 19 10:27:47 UTC: //355/0A78380E82E0/CCAPI/cc_api_call_disconnected:
   Cause Value=63, Interface=0x45351C84, Call Id=355
 
I did some search but found nothing about this "no dsps found" message. Does
anyone have clue about this? Is it about the DSP capacity issue? Thanks very
much.
 
 
Regards,
 
Alan
 
 
 
UTC: No dsps found either locally or globally!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060719/3070e5dc/attachment.html