[cisco-voip] Speed dials

[Scott Coner (US)]

They are used in conjunction with the "AbbrDial" softkey.  A user can
press "1" then "AbbrDial" and the number configured in that slot will be
dialed.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Wednesday, July 19, 2006 2:03 PM
To: ciscovoip
Subject: [cisco-voip] Speed dials

 

This is probably a newbee question, but I've never done it so here it
goes.

 

On the phone setup you can add speed dials in CCMADMIN.

 

How do you use the speed dials that are not associated to the line
buttons?

 

Scott




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060719/b588b5e6/attachment-0001.html