[cisco-voip] how to remove a switch from a stack

[Ed Leatherman]

I think the commands you want to look at are:
switch# show switch
to see how its configured, and:

switch(config)# switch <number> renumber <number>
Becareful with that command on production switch :)

On 7/21/06, James Grace <jgrace at digitel.net> wrote:
>
>  My 3750 still has the interface numbers showing as the 2nd switch in the
> stack  2/0/X.  I reset the switch, everything cleared but the int number
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>


-- 
Ed Leatherman
Senior Voice Engineer
West Virginia University
Telecommunications and Network Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060721/3d84523a/attachment.html