[cisco-voip] DTMF and Cisco IP Communicator

[Lelio Fulgenzi]

It's not just Unity, I was using that as an example. There are no DTMF tones heard at all. I just wanted to get word from the list if this was expected or not. Have you used IP Communicator and heard DTMF when dialing?
  ----- Original Message ----- 
  From: aman 
  To: lelio at uoguelph.ca ; cisco-voip at puck.nether.net 
  Sent: Saturday, July 29, 2006 3:43 PM
  Subject: re: [cisco-voip] DTMF and Cisco IP Communicator


  Communicator is just a skinny device which uses SCCP to talk to cm.check the ccm trace DTMF  digits or even the port status monitor on unity should be able to tell whether any DTMF were recieved or not,also how are you dialing into unity,

  Aman

------------------------------------------------------------------------------
  From: "Lelio Fulgenzi" <lelio at uoguelph.ca>
  Sent: Saturday, July 29, 2006 7:48 PM
  To: cisco-voip at puck.nether.net
  Subject: [cisco-voip] DTMF and Cisco IP Communicator


  I'm not getting any DTMF when I use IPCommunicator. For example, when I dial into voicemail and enter my password, I don't get any feedback on the numbers I push. Is that normal?

  --------------------------------------------------------------------------------
  Lelio Fulgenzi, B.A.
  Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  "I can eat fifty eggs." "Nobody can eat fifty eggs."

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060729/2f382e30/attachment.html