[cisco-voip] 3560 QOS bug?

[Jim McBurnett]

The thing that really gets me, is it comes in to the 3560 as EF
It leaves it and comes into the 4500 as DCSP 0

I could see a COS trust map issue putting it to something else.. But
this?

J
 

-----Original Message-----
From: Ted Nugent [mailto:tednugent69 at yahoo.com] 
Sent: Saturday, July 29, 2006 11:44 PM
To: Jim McBurnett; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 3560 QOS bug?

Also check your trunk to the 4500 and make sure your trusting DSCP...
sorry to state the obvious.

--- Jim McBurnett <jim at tgasolutions.com> wrote:

> 
> 
> 
> Has anyone seen a bug where a 3560 with a QOS config will remove the 
> EF DSCP tagging on a packet as it traverses the switch?
> I have a packet capture where a packet came in marked on a Fast E port

> and when it comes into the upstream 4500 it is not marked EF 
> anymore...
> 
> Thoughts?
> 
> Thanks,
> Jim
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com