[cisco-voip] 7970G Upgrade

[Mike Mike]

Jason,

I downloaded the .exe as well as the .zip files for the 8.0(2)sr1 and do not
see a .bin file as you would see with the older phone loads.  I could be
wrong, but I think these downloads are missing something.



On 5/3/06, Jason Burwell <BurwellJ at firstcharter.com> wrote:
>
> I am trying to upgrade 7970 firmware to SCCP v8.0.2SR1 on CCM 4.1(3)SR3a.
> I have copied all the files into the correct directory on my TFTP server but
> the phone will not upgrade. I would like to verify the correct Load name is
> TERM70.8-0-2-0S . For some reason I cannot find this info in the release
> notes or the readme file. The correct load name is usually there. Can anyone
> verify or correct the name for this load?
>
> Thanks!
> Jason
>
> Jason T. Burwell
> Infrastructure/Telecommunications
> First Charter Bank
> 10200 David Taylor Drive
> Charlotte, NC 28262
> ph-704-688-4664
> fax-704-688-4901
> www.firstcharter.com
>
>
>
> **********************************************************************
> The information transmitted is intended only for the person or entity to
> which it is
> addressed and may contain confidential and/or privileged material. Any
> review,
> retransmission, dissemination or other use of, or taking of any action in
> reliance upon,
> this information by persons or entities other than the intended recipient
> is prohibited.
> If you received this in error, please contact the sender and delete the
> material from
> any computer.
> **********************************************************************
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060503/2a785da5/attachment-0001.html