[cisco-voip] Cisco IP Phone SW/PC Port Configuration

[steve.siltman at assurant.com]

Can the SW/PC Ports be changed to 100/full using a DHCP option or some 
other way without having to visit the phone and do it manually?

Thanks,

Steve Siltman
Assurant, Inc.
Senior Network Analyst
Work: 651-361-4752
Cell: 651-336-5563
steve.siltman at assurant.com
**************************************************************************************
This e-mail message and all attachments transmitted with it may contain legally privileged and/or confidential information intended solely for the use of the addressee(s). If the reader of this message is not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, forwarding or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately and delete this message and all copies and backups thereof.

Thank you.
**************************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060508/1f351f5b/attachment.html