[cisco-voip] Call Manager integration with Samsung IDCS500

[Sechaba Mokoena]

To Whom It May Concern:

 

I am currently installing Call Manager using a 3825 router as my voice
gateway. Currently there are 8 analog trunks between a Samsung IDCS500
and a BT switch. Call Manager will be replacing the BT and we need to
configure digital trunks between the Call Manager and the Samsung
IDCS500. We'll be using BRI ports on the router for the trunks to the
Samsung PABX. Does anyone have any experience with the Samsung IDCS500
PABX and integration with Call Manager 4.3?

 

Best regards,

 

Sechaba Mokoena | Systems Engineer 

KSS Technologies (Pty) LTD.

KSS Convergence - Doing more with less

(IP Phone) +27 11 5456300|(IP Phonedirect) | +27 11 5456331| Fax)+27 11
545 6400| Mobile +27 84 798 6803 |

(e-mail)sechabam at kss.co.za

(website)http://www.kss.co.za <blocked::http://www.kss.co.za> 

Block N, Central Park, 400 16th Road, Randjespark, Midrand, South Africa

 

 

Toll Free Support: 0861 6428 35 

 


This message, including any attachments is intended only for
the persons or entity to which it is addressed, and may 
contain privileged or confidential information. Retransmission, 
dissemination, copying, distribution, modification and / or 
publication of this message by a person other than the intended 
recipient is strictly prohibited by the sender. If you have 
received this message in error, or you feel it is unacceptable 
communication, a chain letter or offensive material of any nature, 
please delete the material and any copies from all systems and 
report it to: 

info at kss.co.za
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060515/1dd5cee9/attachment-0001.html