[cisco-voip] Windows event log messages after upgrade to 2000.4.2sr6

[Ryan Ratliff]

Those are simply the service reading the trace settings from the  
registry upon startup.  RisDC also does this periodically I've seen.

Nothing to worry about.

-Ryan

On May 15, 2006, at 4:04 PM, Justin Steinberg wrote:

I have the following four event log entries in my windows app log
after upgrading to 2000.4.2sr6 with CCM 3.3(3)sr4a.  They all were
logged at the same time and occured around two days after the upgrade.
  The event log messages are on the Subscriber and the ip address
masked below is that of the local machine.

Can anyone shed any light?

Information: SDIControlLayer::SDIControlLayer()-host name or ip =
10.xxx.xxx.xxx,DBL [3.3(3.10427)]; DBLR [3.3(0.242)].

Information: SDIControlLayer::SDIControlLayer()-Trace Registry
Setting 
[ServiceType=7,AsyncFlag=2,mDiscardTraceMaxQueue=10000,mAsycTracePriorit 
y=2,
mAvoidFlushing=2].

Information: SDIControlLayer::SDIControlLayer()-host name or ip =
10.xxx.xxx.xxx,DBL [3.3(3.10427)]; DBLR [3.3(0.242)].

Information: SDIControlLayer::SDIControlLayer()-Trace Registry
Setting 
[ServiceType=13,AsyncFlag=2,mDiscardTraceMaxQueue=10000,mAsycTracePriori 
ty=2,
mAvoidFlushing=2].

Thanks,

Justin

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip