[cisco-voip] CCM 3.3 MGCP Gateway dial delay

[Scott Ingram]

I have started to experience an issue with outside dial patterns.  When
a user hits 9 they hear the outside dial tone then + 10 digit number
there is a 20 Sec delay before  call  rings destination.  I have done
some traces and the call set up and handling seems to be correct.  I
have also watched the ISDN debugs and I'm  not finding any errors.  Any
Ideas?

IMPORTANT NOTICE:

This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law.  If you have received this message in error, you are hereby notified that we do not consent to any reading, dissemination, distribution or copying of this message.  If you have received this communication in error, please notify the sender immediately and destroy the transmitted information.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060517/99d026c1/attachment.html