[cisco-voip] cant recieve call from 614 and 216

[Michael Davis]

Hi Ryan,
 
Where do you see that?  Call ref for that disconnect (0x127) is different from the setup (0x1BB).  Looks to me like that Disconnect is for a different call.  No?
 
James, do you have a more complete q931 debug? 
 
Michael
 

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Ryan Ratliff
Sent: Fri 5/26/2006 11:15 AM
To: James Grace
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] cant recieve call from 614 and 216



Assuming this is an inbound call the telco is sending the Disconnect 
message.

Have you called them yet?

-Ryan

On May 26, 2006, at 11:00 AM, James Grace wrote:

cant receive call from area code 614 and 216

we are having a strange issue.  When I do a debug isdn q931 921  I 
get this ::



*May 26 15:02:08.312: ISDN Se0/0/0:23 Q931: SETUP pd = 8  callref = 
0x01BB

         Bearer Capability i = 0x8090A2

                 Standard = CCITT

                 Transfer Capability = Speech

                 Transfer Mode = Circuit

                 Transfer Rate = 64 kbit/s

         Channel ID i = 0xA98383

                 Exclusive, Channel 3

         Progress Ind i = 0x8281 - Call not end-to-end ISDN, may have 
in-band in

         Calling Party Number i = 0x00C3, N/A

                 Plan:Unknown, Type:Unknown

         Called Party Number i = 0x80, '3035'

                 Plan:Unknown, Type:Unknown

*May 26 15:02:08.312: ISDN Se0/0/0:23 Q921: User TX -> RR sapi=0 
tei=0 nr=38

*May 26 15:02:08.332: ISDN Se0/0/0:23 Q921: User TX -> INFO sapi=0 
tei=0, ns=718

*May 26 15:02:08.332: ISDN Se0/0/0:23 Q931: CALL_PROC pd = 8  callref 
= 0x81BB

         Channel ID i = 0xA98383

                 Exclusive, Channel 3

*May 26 15:02:08.340: ISDN Se0/0/0:23 Q921: User RX <- RR sapi=0 
tei=0 nr=72

*May 26 15:02:08.528: ISDN Se0/0/0:23 Q921: User TX -> INFO sapi=0 
tei=0, ns=728

*May 26 15:02:08.528: ISDN Se0/0/0:23 Q931: ALERTING pd = 8  callref 
= 0x81BB

         Progress Ind i = 0x8088 - In-band info or appropriate now 
available

*May 26 15:02:08.536: ISDN Se0/0/0:23 Q921: User RX <- RR sapi=0 
tei=0 nr=73

*May 26 15:02:08.536: ISDN Se0/0/0:23 Q921: User TX -> INFO sapi=0 
tei=0, ns=738

*May 26 15:02:08.536: ISDN Se0/0/0:23 Q931: DISCONNECT pd = 8  
callref = 0x0127





It show that when a call comes in from NA,  it does not connect.  
Callers all others type of calls work. I can see them going in and 
out.  This is ld and local.



James D. Grace

CCNP CCNA MCSE MCDBA

Sr. System Engineer / Professional Svc.

Digitel Corporation



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip





-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060526/7c54c291/attachment.html