[cisco-voip] Fax Servers
Pritchard, Jon
Jon_Pritchard at adp.com
Fri May 26 17:50:53 EDT 2006
Yes, using separate PSTN connection into the second VGW.
At that point except for L2/L3 QoS the second VGW and the fax server
will be completely separate from your CM/IPT configuration (i.e. no need
to configure it in CallManager).
Jon
-----Original Message-----
From: Voll, Scott [mailto:Scott.Voll at wesd.org]
Sent: Friday, May 26, 2006 9:54 AM
To: Pritchard, Jon
Subject: RE: [cisco-voip] Fax Servers
If I have a MGCP gateway on my PSTN can I just setup a second VGW via
H323 to connect to the Xmedius server?
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Pritchard, Jon
Sent: Friday, May 26, 2006 9:40 AM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Fax Servers
We resell Xmedius. It works very well and is reliable. It is "unknown"
to CM as it integrates directly from the voice gateway via T38 fax-relay
H323 dia-peers (i.e. voice gateway resource is "shared"). It does
support direct integration of some network level scanners (you'd have to
contact them for the current list). Best suited for Unified
Messaging/Exchange environment as it has a plug-in for Outlook so you
can compose and fax directly and receive them in Outlook too. Of course
it has a print driver too. There is a stand alone client you can load
on PC's to compose/send a fax as well. Auto-print output is to network
printers.
One caveat, if you have a MGCP voice gateway then the only way to
integrate Xmedius on the same gateway is to allocate separate H323
resources (i.e. PRI or POTS lines not under MGCP control).
Jon
________________________________
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
> Sent: Thursday, May 25, 2006 1:58 PM
> To: ciscovoip
> Subject: [cisco-voip] Fax Servers
>
>
>
> What kind of price range am I look at for a Fax server that ties in
with
> CM? what are the best out there. I have big xerox's that can do
> scanning so I would like to tie it all together.
>
>
>
> Can I use Unity as a fax server? How does that work?
>
>
>
> Scott
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
This message and any attachments are intended only for the use of the
addressee and may contain information that is privileged and
confidential. If the reader of the message is not the intended recipient
or an authorized representative of the intended recipient, you are
hereby notified that any dissemination of this communication is strictly
prohibited. If you have received this communication in error, please
notify us immediately by e-mail and delete the message and any
attachments from your system.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
More information about the cisco-voip
mailing list