[cisco-voip] Blocking an Inbound Call

[Fedorov, Konstantin]

Hi, Bill.

CCM doesn't have possibilities to make routing decision (also reject) on
the A number ( calling number), so the route pattern don't help.

Its possible discard calls on the gateway, via  voice
translation-profile applied on the voice port or dial-peer.

What protocol do you use between CCM and Gateway ??  H323 or MGCP ??

If MGCP? It can be very tricky to do this, I never check how this work 
(translation-rules) with MGCP. May be someone in the list checked this
??

-----------------------
Sincerely Yours,
Konstantin Fedorov

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Monday, May 29, 2006 1:54 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Blocking an Inbound Call

A customer was having a problem with inbound calls from a specific
number.  Sort of harassment type calls.  I was asked how to block calls
from a specific number.  I had him create a route pattern and check
block this pattern.  Is this the "recommended" method, or is there a
better way to block inbound calls?


This email may contain proprietary and confidential information for the
sole use of the intended recipient. 
Any review, retransmission, dissemination, or other use of this
information by persons or entities other than 
the intended recipient is prohibited. If you are not the intended
recipient, please contact the sender and 
delete all copies. To the extent that opinions are expressed in this
message, they are not necessarily the 
opinions of Sentinel Technologies or any of its affiliates, employees,
directors, officers or shareholders.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip