[cisco-voip] CM 5.0

[Frazee, Timothy]

I am running CCM 5.0.1 on GSX 3.2.0.

 

The problem I have is I have tried to duplicate the install to write a procedure, and it completes the install with no errors. When I try to boot the newly installed system, it freaks out at GRUB and gives me an error. I have looked up the error code and it describes a problem loading the partition with GRUB. There seems to be no “repair” type of option.

 

I have successfully installed 5.0.1 on vmware Workstation 5.5.latestversion many times. Unfortunately the install fails when I try to make a new legacy vm that I can move to GSX. 

 

I have a feeling that when this is released to “public” it will be so cranked down, it will be hard to install in vmware without some tweaking.

 

I have not tried to upgrade a 5.0.1 running in vmware with the downloadable files from cco.

 

Timothy Frazee 

Network Solutions

314.249.8697 cellular phone

________________________________

From: Goran Selthofer [mailto:selt9 at yahoo.com] 
Sent: Tuesday, May 30, 2006 7:32 AM
To: Frazee, Timothy; Voll, Scott; ciscovoip
Subject: Re: [cisco-voip] CM 5.0

 

Timothy,

please give us the exact CCM version you have?
I have tried to run 5.0.2 on VMWARE GSX and Workstation and I have failed both times with the same code:
something like "Not supported hardware..."

also, some procedure will be highly appreciated :)

Thanks,
Goran

"Frazee, Timothy" <Timothy_Frazee at adp.com> wrote:

I have it running on vmware GSX server 3.2.0. Works well. I troubles getting the installer to not freak out. You have to be real specific and emulate a red hat enterprise server 3. When I selected RHES 4, the installer would hang.

 

Timothy Frazee 

Network Solutions

314.249.8697 cellular phone

________________________________

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Friday, May 26, 2006 9:47 AM
To: ciscovoip
Subject: [cisco-voip] CM 5.0

 

Has anyone had the opportunity to get CM 5.x running on non-cisco servers?  I’m thinking I would really like to put it in a lab environment.

 

Scott

________________________________

This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system. 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

________________________________

New Yahoo! Messenger with Voice. Call regular phones from your PC <http://us.rd.yahoo.com/mail_us/taglines/postman5/*http:/us.rd.yahoo.com/evt=39666/*http:/messenger.yahoo.com>  and save big.



This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060530/52d28c55/attachment.html