[cisco-voip] DTMF tones - T1 CAS

[Graham, Darel]

http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a00800
93f5e.shtml


Step 6: Verify the Cisco Equipment Sends and Receives Digits to/from the
PBX

After you confirm the successful supervisory (on-hook/off-hook)
signaling between the PBX and the router/gateway, verify that address
information (DTMF digits or Pulse Dial) is passed between both ends.


End quote

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
bababooey at cox.net
Sent: Wednesday, November 01, 2006 11:49 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] DTMF tones - T1 CAS

On which leads do the dtmf tones appear on for a router connected T1 cas
circuit using E&M Wink Type 1.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip