[cisco-voip] Copying Device Pools?

[Steve Miller]

Missing CD for CM InstallIs there any reason that I cannot create a new Device Pool by copying an existing one and then changing the region and location?  I'm trying to create one specifically for IP Communicators and Remote 7961s that will be used by our high level executives.  I attempted to do this earlier in the evening and the programming window froze for a very long time.  Any advice would be greatly appreciated.  Thank you!

Millerman1
  ----- Original Message ----- 
  From: Mike Lay (milay) 
  To: Kasselman Jevin P ; cisco-voip at puck.nether.net 
  Sent: Thursday, November 02, 2006 8:53 PM
  Subject: Re: [cisco-voip] Missing CD for CM Install


  Will need more that the 7835. What is the complete part number? No this can not be download off of CCO. Depending on the "Cisco OS" release a product key may not be needed. OS 2000.4.3 does not need a product key or HW detect disk.

  http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801149d8.shtml
  http://www.cisco.com/en/US/partner/products/hw/voiceapp/ps378/

  If you can provide the part number for the server I can provide you with the OS version needed for install.

  HP_4_3a: 
     7835-H1 (DL380 G4)
     7845-H1 (DL380 G4)
     7825-H1 (DL320 G3)
     7825-H2 (DL320 G4)

  IBM_4_3a: 
     7835-I1 (8840; x346; x346r) 
     7845-I1 (8840; x346; x346r)
     7825-I1 (8836; 8489; x306)
     7815-I1 (8482; 8487; x206)
     7825-I2 (8849; 8491; x306m)
     7815-I2 (8485; 8490; x206m)

  Mike



------------------------------------------------------------------------------
  From: Kasselman Jevin P [mailto:jkassel at weci.net] 
  Sent: Thursday, November 02, 2006 7:26 PM
  To: Mike Lay (milay); cisco-voip at puck.nether.net
  Subject: RE: [cisco-voip] Missing CD for CM Install


  It is an IBM server 7835.  I am asuming it is 2000 but no cd to look at or docs to tell.  CCM version that was included is 4.1.  Is this something that can be downloaded off of cco?  Even if so, I am still missing the product key. I put a call into the reseller and am awating a responce.

  Jevin Kasselman
  Wheatland Electric Cooperative, Inc
  Email: jpkassel at weci.net



------------------------------------------------------------------------------
  From: Mike Lay (milay) [mailto:milay at cisco.com]
  Sent: Thu 11/2/2006 7:16 PM
  To: Kasselman Jevin P; cisco-voip at puck.nether.net
  Subject: RE: [cisco-voip] Missing CD for CM Install


  Yes, you need to get the correct disks. What is the part number of the server & what OS version? In 2000.4.3 there is no hardware detect disk, one disk for all HP server & one disk for IBM servers.

  Mike



------------------------------------------------------------------------------
  From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kasselman Jevin P
  Sent: Thursday, November 02, 2006 7:09 PM
  To: cisco-voip at puck.nether.net
  Subject: [cisco-voip] Missing CD for CM Install





  Greetings,

  I was beginning the install of a new cm (v4.1) and am missing the hardware detection and os dvd.  The set from 4.0 will not work either.  When trying to use them it does not like the hardware.  Can I load win serv directly and load cm or do I need to get these specific dvd to install?

  Regards,

  Jevin Kasselman
  Communications Division
  Wheatland Electric Cooperative, Inc
  Email:  jpkassel at weci.net




------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061102/b53125fa/attachment-0001.html