[cisco-voip] Break Mirror on HP MCS

[Ryan Ratliff]

Pulling a drive while the server is essentially pulling the plug on  
the server, at least from that drive's perspective.  It may work, but  
isn't a TAC or HP supported means of backup.  If you are going to  
break the array power down the server first.

-Ryan

On Nov 3, 2006, at 9:17 AM, Klaczko, Edwin wrote:

I’ve ordered some spare HDs and wanted to use them to keep an extra  
backup.  I’m used to working with Dell servers and had a bad  
experience pulling a hot-swap drive live.  Their RAID controller  
allows you to power down a drive to remove it.  I couldn’t find a  
similar feature on the HP interface.  Is this necessary or is it safe  
just to pull the drive live.  Any help would be appreciated.





Eddie Klaczko

IP Telephony / Network Specialist

CC Schaumburg School District 54

eklaczko at sd54.org



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip