[cisco-voip] 2821 / 2851 routers with integrated ethernet blades - anyone using them?

[Voll, Scott]

We just purchased a 2821 with the Ethernet switch module.  Have not
deployed since we have not received it yet.

Scott

PS. The site will only have 4 phones and a BRI Voice Circiut.


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robert
Kulagowski
Sent: Friday, November 03, 2006 8:03 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 2821 / 2851 routers with integrated ethernet
blades - anyone using them?

http://www.cisco.com/en/US/customer/products/ps5855/products_data_sheet0
900aecd8028d15f.html

These ethernet service modules support 802.3af POE and some other neat 
stuff.  Appear to be better than the older generation, have Stackwise, 
SFPs, etc.

Has anyone deployed them?  Thoughts?  Reasons to _not_ deploy at a site 
which would normally have a 3750-24 or -48?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip