[cisco-voip] FW: Missing CD for CM Install

[Kasselman Jevin P]

Thanks Mike.

 

It is a 7835-I1, x346, type 8840 

 

Jevin Kasselman

Communications Division

Wheatland Electric Cooperative, Inc

Email:  jpkassel at weci.net

________________________________

From: Mike Lay (milay) [mailto:milay at cisco.com] 
Sent: Thursday, November 02, 2006 7:54 PM
To: Kasselman Jevin P; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Missing CD for CM Install

 

Will need more that the 7835. What is the complete part number? No this
can not be download off of CCO. Depending on the "Cisco OS" release a
product key may not be needed. OS 2000.4.3 does not need a product key
or HW detect disk.

 

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0
9186a00801149d8.shtml

http://www.cisco.com/en/US/partner/products/hw/voiceapp/ps378/

 

If you can provide the part number for the server I can provide you with
the OS version needed for install.

 

HP_4_3a: 
   7835-H1 (DL380 G4)
   7845-H1 (DL380 G4)
   7825-H1 (DL320 G3)
   7825-H2 (DL320 G4)

 

IBM_4_3a: 
   7835-I1 (8840; x346; x346r) 
   7845-I1 (8840; x346; x346r)
   7825-I1 (8836; 8489; x306)
   7815-I1 (8482; 8487; x206)
   7825-I2 (8849; 8491; x306m)
   7815-I2 (8485; 8490; x206m)

 

Mike

 

________________________________

From: Kasselman Jevin P [mailto:jkassel at weci.net] 
Sent: Thursday, November 02, 2006 7:26 PM
To: Mike Lay (milay); cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Missing CD for CM Install

It is an IBM server 7835.  I am asuming it is 2000 but no cd to look at
or docs to tell.  CCM version that was included is 4.1.  Is this
something that can be downloaded off of cco?  Even if so, I am still
missing the product key. I put a call into the reseller and am awating a
responce.

 

Jevin Kasselman

Wheatland Electric Cooperative, Inc

Email: jpkassel at weci.net

 

 

________________________________

From: Mike Lay (milay) [mailto:milay at cisco.com]
Sent: Thu 11/2/2006 7:16 PM
To: Kasselman Jevin P; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Missing CD for CM Install

Yes, you need to get the correct disks. What is the part number of the
server & what OS version? In 2000.4.3 there is no hardware detect disk,
one disk for all HP server & one disk for IBM servers.

 

Mike

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kasselman Jevin
P
Sent: Thursday, November 02, 2006 7:09 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Missing CD for CM Install

 

 

Greetings,

I was beginning the install of a new cm (v4.1) and am missing the
hardware detection and os dvd.  The set from 4.0 will not work either.
When trying to use them it does not like the hardware.  Can I load win
serv directly and load cm or do I need to get these specific dvd to
install?

Regards,

Jevin Kasselman
Communications Division
Wheatland Electric Cooperative, Inc
Email:  jpkassel at weci.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061103/0180b097/attachment-0001.html