[cisco-voip] RP Wildcards A,B,C,D

[Jason Aarons (US)]

MLPP
 
Command and Control
 
AT&T had lines buried into concrete to survive a cold-war attack...this feature was requested by Dept of Defense for military requirements

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Howard, Chad
Sent: Fri 11/3/2006 4:08 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] RP Wildcards A,B,C,D


Anyone know what the route pattern wildards A, B, C, D are used for ?
 
The docs I've found so far say they're valid characters, but they aren't listed in the wildcard explanations.
 
Thanks.
CONFIDENTIALITY NOTICE: 
This e-mail communication and any attachments may contain proprietary and privileged information for the use of the designated recipients named above. 
Any unauthorized review, use, disclosure or distribution is prohibited. 
If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061103/22c25252/attachment.html