[cisco-voip] PSTN Question

[Robert Kulagowski]

>> Ahmad Cheikh-Moussa wrote:
>> If you can't get the provider to send a leading 0, then you can use the 
>> num-exp command or something like the voice translation rules
>>
>> http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml
>>
>> to add in a leading 0.
> 
> For H.323 no problem. But how will I  do this in mgcp ?

Prefix DN on the PRI configuration page on the MGCP gateway?