[cisco-voip] Use next route group on ARJ

[Howard, Chad]

It appears that if I send a call to a gatekeeper and it sends back a
reject then the call is over (fast-busy).  

Is there any way to get Call Manager to use the next route group in the
route list instead of failing the call?  The idea is that I want to
check for an internal DN before sending to the gateway.  If there is not
a DN registered on the far end Call Manager then I'd send the call to
the PSTN.

Something like this:

Route_List1
   RG_ICT_to_Gatekeeper
   RG_Gateway1
   RG_Gateway2


If I can't figure out a way to do that, then I'll have to maintain a
list of "off-cluster" DN's on every cluster...could get painful beyond a
couple clusters.

Thanks.
CONFIDENTIALITY NOTICE: 
This e-mail communication and any attachments may contain proprietary and privileged information for the use of the designated recipients named above. 
Any unauthorized review, use, disclosure or distribution is prohibited. 
If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.