[cisco-voip] CFwdAll a Hunt Pilot/Line Group

[Jason Aarons (US)]

Just as there is a Service Parameter to enable Call Pick Up for a Line
Group, is there a Service Parameter for CFwdAll on a DN that is a member
of a Hunt Pilot/Line Group ?

 

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administra
tion_guide_chapter09186a00803edafe.html

 

 

 

 

Jason Aarons

Consultant

http://www.dimensiondata.com/na

904-338-3245 cell

 

For urgent issues notify your Project Manager, for 24x7 support contact
the Dimension Data NOC at 800-974-6584.

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061114/b8ba1fc0/attachment.html