[cisco-voip] Parked line # display on phones

[Jonathan Charles]

Change the Call Park Display Timer in CallManager Service Parameters, the
default is 10 secs.

"This is a generic timer which provides the flexibility to change the
duration of Call Park Number display and other notification displays on the
IP phone. A value of 0 causes the message to be displayed until it is
overwritten by another message of equal or higher priority. Specify a value
that is less than or equal to the value that is specified for the Call Park
Reversion Timer service parameter; if the value is not less, the call park
display will be overwritten after the call park reversion time expires. This
parameter applies to Cisco IP Phone models 7940, 7960, and newer."



Jonathan


On 11/21/06, Duane Priebe <duane at theriverbank.com> wrote:
>
>  Does anyone know of a parameter that can be changed so that when someone
> parks a call the park # stays on the phone display longer than 5 seconds?
>
>
> DAP
>
> Network Admin/IT Manager
> The RiverBank
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061121/9ae0fd39/attachment-0001.html