[cisco-voip] on outside calls there is no extension numbers

[Patrick Diener]

You can control/modify the digits that CCM sends to the PSTN gateway either
on the Route Pattern or Route List (specific for each Route Group in that
List).
If you are using a H323 PSTN GW you could also specify digit manipulation on
the GW itself (e.g. using voice translation rules)

In your case a simple "Calling Party Transform Mask" on the Route Pattern
could do the trick e.g. 3199XXX
this transform mask will change the calling party number in your example
from 1064 to 3199064...

Cheers
Patrick

On 11/22/06, gokhan senol <gokhanciscottl at yahoo.com> wrote:
>
> Hi,
> my pri number is: 3199000
> and i use 1xxx Directory numbers as  internal.(i made this by setting
> significant digits=3 and prefix=1)
> DID is working.
> But my problem is when i call from ip phone for example 1064 to pstn , on
> the called phone my number is seen as 3199000 instead of 3199064..how can i
> fix this problem
> thknx a lot
> ccm4.1.3
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061122/b947459c/attachment.html