[cisco-voip] fax problem with ata186 I2

[Steve G]

You could paste your MGCP config.  also, the output of a 'show controllers
t1'.

On 11/24/06, gokhan senol <gokhanciscottl at yahoo.com> wrote:
>
>  Hi,
> design is simple:   mgcy gateway which has PRI line, ccm 4.1.3 and ata186
>
> everthing is ok except sending fax. i am tyring to send fax to pstn but
> most ot thi time i got fail.
>
> which settings should be for ata  audio mode: 0015 , 0012, 0035 ?
> which settings should be for ata  connect mode:
>  which settings shoul be in mgcp gateway 2851 router : mgcp fax t38
> inhibit, no modem passthrough,
> tehre are lots of command but actually i did not understand clearly fax
> issue..
>
> thkns a lot
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061124/118d755f/attachment-0001.html