[cisco-voip] Bulk Edit of Softkey Template?

[Matt Slaga (US)]

You should adjust your softkey templates through device pools and not
individually per device.  However, once you set them per device there is
no bulk way to go back and change it (BAT limitation #352,324)

 

 

 

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tech Guy
Sent: Monday, October 02, 2006 9:49 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Bulk Edit of Softkey Template?

 

Can't seem to find within the BAT tool a way to do a mass edit of the
softkey template on all phones?

 

Just upgraded to 4.1(3) and want to edit the softkey template to take
advantage of the "iDivert" feature and I am just not finding a way to do
this?

 

Softkey Template is set per phone, so I figured you would use BAT and
then select Update Phones, but it does not seem to be an option to
update the Softkeys

 

Any ideas?




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061002/31dcf996/attachment.html