[cisco-voip] NM-HD-2V and NM-HDA support on 3700 Routers for CME 4.0

[MIHI]

Hi,

These modules should all work in a 3700 series, see
Voice Hardware Compatibility Matrix
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186
a00800e73f6.shtml

It sounds strange that Software Advisor came up with 2801 for an NM-...

You can also try building your 3725 system in Dynamic Configurator:
https://tools.cisco.com/qtc/config/html/configureHomeGuest.html

Marton

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lawrence E. Bakst
Sent: Sunday, October 08, 2006 1:58 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] NM-HD-2V and NM-HDA support on 3700 Routers for CME
4.0

Is anyone using any of the NM-HDA, NM-HD-2V, or AIM-CUE on a 3725 or 3745
running CME 4.0?

I am currently running both the NM-HDA and NM-HD-2V on a 3640 under IOS
12.3(14)T3 with CME 3.3.

I'd like to move my cards from a 3640 to a 3725, add a AIM-CUE, and run CME
4.0 and Unity Express. Anyone know if that will work?

The 12.4T feature support release notes show that none of these modules are
supported on the 3700 series routers.

The Cisco software advisor shows that the NM-HDA is only support on
2610-2613, 2801, 2851, and 38xx. Weird that the 2811 and 2821 aren't
supported.

The Cisco software advisor shows that the AIM-CUE is only support on 2801,
2851, and 38xx. Weird that the 2821 isn't supported.

I'm not sure I should trust the Cisco software advisor?

Did support go away in 12.3T/12.4, did it ever exist, or are the docs wrong?

Best,

leb

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip