[cisco-voip] TIP: CNAM without requiring MGCP

Jason Aarons (US) jason.aarons at us.didata.com
Sat Oct 14 10:19:00 EDT 2006


Whom was the telco providing the SIP trunk?

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Zilk, David
Sent: Friday, October 13, 2006 8:20 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] TIP: CNAM without requiring MGCP

 

Many of you have run across the problem of not being able to utilize
Caller ID Name (CNAM) information from a telco using H.323.  Since CNAM
is provided by most telcos  within the facility IE field, and this isn't
supported in H.323, the solution has always been to convert to MGCP.
If you needed to stick with H.323 or gateway based call routing for
other reasons, such as needing to support other H.323 devices, or use
TCL scripts, you were out of luck.

 

In one of those "why didn't I think of that before" moments, one of my
colleagues thought to test connectivity using an incoming SIP dial peer
and SIP trunk on call manager.  Lo and behold, CNAM works perfectly!
H.323 dial peers can still be used as needed to match other inbound and
outbound traffic, and since the routing decisions are being done at the
gateway, TCL scripts can still be used.

 

A few SIP specific parameters are required on the gateway including:

 

signaling forward unconditional

sip

  bind all source-interface <interface>

!

!

sip-ua 

  timers buffer-invite 5000

 

As well as adding " session protocol sipv2 " to the incoming voip
dial-peer.

 

 

Configuration on Call Manager includes adding an RFC 2833 DTMF-compliant
MTP resource and setting up a SIP Trunk to the gateway.

 

 

While we have not fully tested this configuration, it appears to solve
the problem of not being able to receive caller-id name information
while still maintaining gateway based call routing. 

 

Can anyone point to any problems we might encounter with this setup?

 

 

 

David Zilk

 

________________________________

This message and any attachments are intended only for the use of the
addressee and may contain information that is privileged and
confidential. If the reader of the message is not the intended recipient
or an authorized representative of the intended recipient, you are
hereby notified that any dissemination of this communication is strictly
prohibited. If you have received this communication in error, please
notify us immediately by e-mail and delete the message and any
attachments from your system. 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061014/98c30eb0/attachment-0001.html 


More information about the cisco-voip mailing list