[cisco-voip] Line Groups and Call Pickup

[Jake Rybak]

Thank you so much but I forgot to mention the CM version of 5.0(4a).

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of May, Simon
Sent: Thursday, October 19, 2006 10:45 AM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Line Groups and Call Pickup

If you are on 4.1(3)sr3 CCM then there is an engineering Fix for this
issue.

In System, Enterprise Parameters, right at the bottom, under the heading
"Cisco Support Use" ...

Put the following code in the "Cisco Support Use 1" field.

CSCsb42763

This will allow call pickup within hunt groups.

If you are on 4.2 CCM then this feature is not supported at present,
until an engineering fix is released.

Hope this helps

Simon May

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip