[cisco-voip] 4506 switchport config for 7936

[Lelio Fulgenzi]

It all depends on your security model. Why configure a port differently than all your other ports? I don't think there is any added value and quite honestly, I think there's more harm than anything. Port management is a big deal around here, so the easier the config the better. By sticking with a standard, you can move your device to any port and it works and you can move any device, laptop or phone, to that port and it works.

My (much more than) two cents...

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."
  ----- Original Message ----- 
  From: Casanova, Chase 
  To: cisco-voip at puck.nether.net 
  Sent: Tuesday, October 24, 2006 3:33 PM
  Subject: [cisco-voip] 4506 switchport config for 7936


  Since the 7936's don't have PC ports, is there a reason to setup a voice vlan on the switchport or is just setting the switchport up as access vlan with the access vlan being the voice vlan enough?

   

  Thanks,

  -C



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061024/7c73dd81/attachment.html