[cisco-voip] CCM4.1 to GK to MCU...

[Hinson, Greg]

Are you using a Cisco MCM gatekeeper, or a Radvision ECS gatekeeper? I
ask because they both handle differently when it comes to zone prefix
definition and digit stripping
 
-Greg
________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
Charles
Sent: Monday, October 30, 2006 9:38 AM
To: Cisco Voip
Subject: [cisco-voip] CCM4.1 to GK to MCU...
 
OK, I have a CCM4.1 box, and I am trying to get it to connect (for
video) to a Cisco MCU, via a gatekeeper...

The MCU is registered to the gatekeeper as an endpoint, but I can't get
the CCM to do the same...

I have a gatekeeper controlled trunk pointing at the MCU (with the GK
identified)...

Still nothing...

I also added a couple of route-patterns (with the MCU service prefixes)
pointing at the trunk... Still nothing... 


gatekeeper
 zone local 10.1.1.1 binky.com
 zone subnet 10.1.1.1 10.1.1.0/22 enable 
 zone prefix 10.1.1.1 2125554244*
 gw-type-prefix 1#* default-technology
 no shutdown



Any ideas?

TIA



Jonathan


This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061030/8bcd9f84/attachment.html