[cisco-voip] CME 3.3 and 79xx phones with clock drift
Ryan Ratliff
rratliff at cisco.com
Tue Oct 31 09:00:51 EST 2006
The phones get the time from CCM. Pretty much every time you make a
call the time is updated from CCM to the phone so fix the drift on
the CCM and you'll fix the phones.
-Ryan
On Oct 30, 2006, at 8:24 PM, Lawrence E. Bakst wrote:
Is there any way to prevent clock drift with 79xx phone under CME
3.3? My CME router is synced to NTP so the router's time is correct,
but after weeks or months of uptime the clocks on the phones drift. I
am using SCCP but I found the following SIP bug:
CSCef38121: Cisco 79x0: NTP Clock drift on SIP Phones
Symptom: The Cisco 7940/7960 phones exhibit a clock drift issue
Workaround: A phone reset will restart the time clock.
Has this been fixed in any latter versions? Is it too much to ask
that the phones would run NTP? It doesn't seem like they do.
I am running the following loads:
load 7960-7940 P00306000500
load 7920 cmterm_7920.4.0-02-01
load 7970 TERM70.6-0-3SR1S
Best,
leb
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list