[cisco-voip] Unity Question

[Ed Leatherman]

Gary,

Apologies if I misunderstand your problem. The setup that is outlined in the
Unity integration docs for callmanager should keep you from running into
that problem. The partition that your voicemail ports are in shouldn't
appear in any calling search spaces especially ones that are on phones or
gateways. that alone should let you re-use those numbers without running
into overlapping problems - nothing should be able to call those particular
lines except through the hunt pilot. The only number you have to reserve is
your pilot number afaik.

I've not tried to put any special characters in the voicemail ports.. not
sure how Unity would deal with those I dont think it likes those characters.

Ed
On 10/31/06, Gary L. Pate <gpate at kenttech.com> wrote:
>
>  I guess I'm looking for a "recommended solution" for handling voice mail
> ports. I have a scenario where the numbers being used for VM ports are
> interfering with numbers needing to be assigned to phones. The ports
> themselves are in a different partition (PT Hidden), but in a CSS of Line 1
> (CSS Line 1, of which all the phones are also a member of).
>
> Can someone recommend how they setup the VM ports in regards to the PT and
> CSS, and then how they handle the VM Pilot, profile, & Hunt Pilot in regards
> to the PT and CSS?
>
> Also, has anyone ever setup the VM ports using special characters? IE *,
> #, or anything like that in the number? Any plus or minus to doing that?
>
>
>
> Any suggestions would be appreciated.
>
>
>
> Gary
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>


-- 
Ed Leatherman
Senior Voice Engineer
West Virginia University
Telecommunications and Network Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061031/62a8d1a8/attachment-0001.html