[cisco-voip] What is command to disable (busy out) b-channel on T1 PRI?

[Mike Mike]

I believe you need to go into the controller config and busyout the ds0

On 9/1/06, John Neiberger <jneiberger at gmail.com> wrote:
>
> Is this on an MGCP or H.323 gateway?
>
> On 9/1/06, Jason Aarons (US) <jason.aarons at us.didata.com> wrote:
> >
> >
> >
> >
> > What is command to disable (busy out) a single b-channel on PRI? Show
> isdn
> > service shows all in-service, I need to take a channel out of service
> -jason
> >
> >
> > ________________________________
> >
> >
> >
> >
> >
> >
> >  Disclaimer:
> >
> >  This e-mail communication and any attachments may contain
> >  confidential and privileged information and is for use by the
> >  designated addressee(s) named above only. If you are not the
> >  intended addressee, you are hereby notified that you have received
> >  this communication in error and that any use or reproduction of
> >  this email or its contents is strictly prohibited and may be
> >  unlawful. If you have received this communication in error, please
> >  notify us immediately by replying to this message and deleting it
> >  from your computer. Thank you.
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060901/71ca549a/attachment.html