[cisco-voip] facility ie

[Ryan Ratliff]

If the call is going to CallManager we do a decent job of decoding  
them in the ccm traces.

-Ryan

On Sep 5, 2006, at 11:02 AM, Martin Lohnert wrote:

Hello,
Is there any way to find out what an unsupported facility ie actually  
is? I have a q.sig E1 to a legacy pbx, and in debug q.931 we see the  
following:
----------------------
Aug 24 10:52:06.868: ISDN Se0/2/1:15 Q931: RX <- FACILITY pd = 8   
callref = 0x274B
         Facility i =  
0x9FAA06800100820100A11002021B6D06072B0C028852B66D160131
                 Protocol Profile =  Networking Extensions
                 0x0100
                 0x820100
                 0xA11002021B6D06072B0C028852B66D160131
                 Component = Invoke component, Unsupported operation
Aug 24 10:52:06.872: ISDN  **ERROR**: isdnAsn1Component: error:  
unknown type 10
Aug 24 10:52:06.872: ISDN  **ERROR**: isdn_decode_facility_ie:  
isdnAsn1DecComponent failed
-----------------------

Cheers, and TIA!
ML
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip