[cisco-voip] Setting up local DSP resources on 2821

[Ryan Ratliff]

It's CallManager that decides what resources a device uses. The  
configuration on the router is simply to get it registered.

You put the device in a MRG, and then the order of MRGs in the MRGL  
decides preference.

-Ryan

On Sep 6, 2006, at 2:02 PM, Ortiz, Carlos wrote:

Were the questions regarding DSPFARM configs in the email below ever
answered?

I have configured my DSPFARM on a 2811 but how do you actually make
these resources the first choice for the users at that remote site?  I
assume some configuration in the conf bridge resources and MRGL but I
can't find a doc specifically for the 2800 routers.  Anyone have a link?

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erik Erasmus
(E)
Sent: Tuesday, July 18, 2006 3:20 PM
To: Ted Nugent; Wydra, Jason; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Setting up local DSP resources on 2821


Hi Ted

Sounds like you have done it a couple of times.

Q1. I notice in the config examples they have an example that has

voice-card 1
no dspfarm
dsp services dspfarm

bit confusing - why no dsprarm and right below it dsp services dspfarm
???

Q2. They also show
associate profile 10 register CFB123456789966
associate profile 6 register MTP123456789988

where does the values after register come from - are they arbitrary
things one choose and need to be unique per site and per profile I
register etc.???


oip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip